AKM42J-AND2GF00

Product Description

The AKM42J-AND2GF00 synchronous servomotor manufactured by Kollmorgen has one angular rotatable connector. This product setup is meant to be done only by personnel with extensive expertise in electrical engineering as well as drive technology. The device may cause damage to property or personnel injury as a result of improper handling. This unit has a smooth shaft. Its surface becomes very hot and has a temperature higher than 100 °C when it is being used. The motor related connection cables have an operating temperature of -30 °C to 85 °C. This product must not be lifted or carried by holding on to its shaft. This device housing should be earthed safely to the protective earth busbar in the associated switch cabinet. The unit must have its connectors intact during the operation phase. Its power connections may be live for a short while after operation even if the shaft is not rotating. This servomotor must be associated with an external mechanical brake when it has hanging loads to ensure personnel safety. The product is meant to be deployed only for those applications that are specified by the manufacturer. This device should be driven by a servo amplifier under speed and/or torque control. The motor holding brake cannot be operated repeatedly. This unit is not supposed to be operated in potentially explosive areas. It has a climate category of 2K3 during operation as per IEC 60721-3-2 and EN 61800-2 specifications. The product is not to be cleaned using a spraying or immersing action. This device operation must be stopped as soon as bearing noises are heard. The unit is to be transported and stored only in the manufacturer's original recyclable packaging material. It uses a multi-turn optical HIPERFACE DSL encoder with a maximum of 4096 revolutions for its feedback.