Product Description

The AKM42G-ACC2R-00 Kollmorgen synchronous servomotor has a G type winding. This motor may cause minor burns if its surface is touched when it is hot. The product can be installed only in industrial electrical machinery for which a hazard analysis has been done. This device does not render electrical safety without a low-resistance earth connection. The unit has a keyway shaft and a 24 VDC holding brake. Its connectors have a high voltage of 900 V when the motor is being operated. This motor is recommended for applications that demand high dynamic requirements. The product is not meant to be connected directly to the mains supply. This device must be free of shock, especially at the shaft end during its transportation. The unit can be stored for an unlimited duration as long as the storage conditions are followed. Its shaft key comes protected with a key at the time of delivery. This servomotor operation must be terminated as soon as any bearing noises are heard. The product is made of environment-friendly materials that ensure there is no harm to the environment with its operation. This device features a slight change to its standard length because of the comcoder feedback. The unit has a peak torque of 11.5 Nm. It can be directly mated to most servo drives from the manufacturer. This servomotor is associated with Class F insulation. The product portrays an IP 54 protection class. This device has no customization. The unit is not recommended for encapsulated mounting. The unit portrays a power rating of 1%/K when it is operated at a temperature higher than 40 ?C up to 50 ?C.