Product Description

The AKM41S-ANS22-02 Kollmorgen synchronous servomotor transmits power through the cylindrical shaft end on side A. This motor portrays special customization. The product supports vertical as well as diagonal mounting. This device has a vibration class of N as per DIN 60034-14 specifications. The unit uses angular connectors for its feedback and power supply signals. Its comcoder is an incremental encoder with commutation support. This motor is delivered with a holding brake that relies on a spring action for its operation. The product has a three-phase winding in the stator and is designed as a brushless DC motor. This device is designed to be used at a temperature ranging from 5 ?C to 40 ?C. The unit has a grease packing on its ball bearings that lasts for 20,000 operation hours under rated conditions. Its permanent magnets are made of materials that allow the motor to be driven in a highly dynamic fashion. This motor along with the servo amplifier is suitable for positioning tasks in industrial robots. The product does not support a retrofitting action on its holding brake and feedback system. This servomotor must be free of liquid accumulation around the output shaft with an IM V3 mounting style. The device comes with special windings. This unit has a maximum bus voltage of 640 VDC. It tends to have a decreased lifespan because of axial loading. The motor length is more than the standard size because of the holding brake. This product associated shaft and flange are highly vulnerable during storage and assembly. The device must have an electrical connection with a large surface area between the unit indicated and the mounting plate where a ground symbol is mentioned in the wiring diagram to avoid interference.