Product Description

The AKM41H-EKMNEH00 is a high-performing servomotor from the house of Kollmorgen. The unit has an open keyway shaft. It does not have a holding brake and hence its length remains unaffected. The product does not have any brushes and commutation is performed electronically by the servo amplifier used. The motor comes with ball bearings. If there are noises heard in the bearings during operation, the device should be turned off, and the bearings should be replaced. The user should not clean the housing of the servomotor using water or any other liquid. The housing can be cleaned using isopropanol or a similar cleaning agent. The AKM servomotor features 0.5m shielded cable with IP20 connectors. The flange size of the motor is 84 mm. The motor is coated with matt black enamel. The motor has a standstill torque of 2.06 Nm and a standstill current of 5.60 A. The maximum mains voltage of the device is 480 VAC. The peak current of the unit is 22.4 A and its peak torque is 6.36 Nm. The rotor moment of inertia of the unit is 0.81 J. The thermal time constant of the motor is 13 minutes. Only personnel with extensive knowledge in electrical engineering and/or drive technology should commission the drive unit of the servo amplifier and AKM servomotor. Care should be exercised that the electrical connections to the motor are never undone when it is live. The residual charge in the capacitors of the servo amplifier is capable of producing dangerous voltages up to 5 minutes after turning off the mains supply. Also, before touching the surface of the motor, the user should ensure that it is below 40?C.