Product Description

The AKM41H-ANCNC-00 synchronous servomotor supplied by Kollmorgen has no customization. This product has a smooth shaft and a flange that is designed according to IEC standard. The unit tends to move out of place if its phases are in the wrong sequence. It comes without a holding brake and hence its length is not affected. This motor should not be lifted by holding on to its shaft. The product has a brushless design and hence its commutation gets done electronically by the connected servo amplifier. This device should not be put to operation if bearing noises are heard. The servomotor should not be sprayed with liquid to clean its housing. The unit can be cleaned by rubbing a cleaning agent like isopropanol on its housing. It supports a maximum stacking height of 10. This product comprises rotatable angular connectors for its connection. The device has a flange of 84 mm size. This unit has a RAL 9005 black enamel. It is not recommended for encapsulated mounting. The motor depicts a rated torque of 1.99 Nm at 75 VDC. This product does not have a seal around its shaft. The device features Class F insulation at 155 °C. This unit uses a hybrid cable with power lines and four signal lines for the connection of its feedback system. The motor must have no liquid around the shaft with IM V3 style mounting. This product assembly is supposed to be performed by personnel with adequate knowledge of mechanical engineering. The device associated pulley or gear wheels have to be tightened using the provided locking thread. This unit may have unacceptable vibrations when the couplings are incorrectly aligned.