Product Description

The AKM41H-ANCN2-01 Kollmorgen synchronous servomotor and the supporting servo amplifier render a highly efficient drive control system. This motor has a high power density that contributes to its excellent performance. The product features plug-and-play recognition. This device can be directly mated to most Kollmorgen servo drives. The unit houses a radial shaft seal that increases the protection class. It is necessary to install cables that have a heavy current with an adequate cross-section as per EN 60204 specifications. This motor wiring must be done using preassembled cables in accordance with valid standards and regulations. The product has a weight of 5.4 kg. This device has a torque lesser than 0.1 Nm of the standard torque because of the non-resolver feedback. The unit related axial force must not exceed one-third of the radial force. It portrays a high radial force if it is driven through toothed belts or pinions. This motor portrays IM B5 mounting style by default although IM V1 and IM V3 mounting orientations are permitted. The product has an electrically isolated PTC with a temperature rating of 155 ?C and a tolerance of +/-5%. This device housing is not resistant to agents like trichloroethylene and nitro-thinners. The unit is available without a holding brake. Its electrical connections must never be undone in the energized state. This servomotor related power cables and control cables should be routed at a distance of more than 20 cm from each other. The product should have an earth connection for its housing and mounting plate. This device must comply with the manufacturer specified axial and radial forces. The unit connection is assembled with preassembled cables that are UL Listed and have the UL style number printed on the housing.