Product Description

The AKM41H-AN92GF00 synchronous servomotor by Kollmorgen installation must be done such that there is unhindered ventilation on all sides. This product has to be associated with only frictionally locking collets as far as possible. The unit has a rotor length of 1. It is equipped with a holding brake with 24 VDC voltage rating. This motor is UL Recognized, CE Certified and cUL Recognized. The product has a cylindrical smooth shaft end. This device depicts a maximum rated speed of 8000 min-1. The unit has a H type winding. Its coating is not resistant to solvents. This servomotor must not be immersed in liquid for clearing. The product has a vibration resistance of 10G / 10-2000 Hz as per EN 60068-2-6 standards. This device supports a maximum axial load of 180 N at 3000 min-1 at the shaft end. The unit is lightweight and weighs 2.44 kg. Its holding brake has a holding torque of 6 Nm at 120 °C. This motor tends to get destroyed if the associated servo amplifier has been set with an incorrect number of motor poles and resolver poles. The product is likely to have a mechanically constrained shaft if rigid couplings with additional external bearings are used. This device is used in machinery where high dynamics is of prime importance. The unit must be used only with the cables and servo amplifier supplied by the manufacturer. Its stator comprises a three-phase winding that is powered by the servo amplifier. This motor does not support a retrofit of its holding brake. The product also encompasses permanent magnets embedded in its rotor. This device has 95% relative humidity at rated values when it is being operated. The unit will not rotate if its holding brake is not released. It encounters faults while in use because of errors in the parameters of the servo amplifier.