Product Description

The AKM41C-ANCNDB00 synchronous servomotor manufactured by Kollmorgen has a smooth shaft and no holding brake. This product cannot be connected directly to a mains supply network. The device must never have condensation on its surface during the operation, transportation and/or storage period. This unit can be lifted horizontally as well as vertically. Its bearings have to be replaced after their lifetime under rated operating conditions. The motor comes along with a copy of its manual printed in multiple languages. This product has no derating for use in a site altitude of over 1000 m above sea level and a temperature reduction of 10 K per 1000 m. The device encompasses a matt black polyester powder coating. This unit incorporates a smooth shaft and has a standard construction. It must not encounter forces above the limits specified by the manufacturer. The motor encompasses a Class F insulation. This product related combination cables feature power lines and two lines for holding brake control. The device has no integrated fan. This unit features a flange size of 4. Its flange and shaft are vulnerable to force during storage and assembly. The product must be set up such that there is adequate heat transfer in the flange and surroundings. This device can be wired only by people qualified and trained in electrical engineering. The unit can cause unfavorable consequences if its electrical connections are undone when it is energized. It must always be used with a matching servo amplifier. This servomotor has 1.95 Nm standstill torque with a tolerance of +/-10%. The product experiences damage of its shaft and bearings when it encounters blow. This device must never have a mechanically constrained shaft mounting. The unit has four pole pairs. Its insulation clearances must not get altered during transport and handling.