Product Description

The AKM41C-ANCN2-01 synchronous servomotor by Kollmorgen has a radial shaft sealing ring that increases the environmental protection rating of its shaft bushing. This motor may have live control and power leads for a short period after operation. The product can be touched following its operation only after ascertaining that its DC link voltage is less than 60 V. This device setup includes checking for the correct setting and seating of the related drive components. The unit operation must be stopped as soon as any grinding noises are heard. Its power connections must be done using only preassembled cables from the manufacturer. This motor shielding must be connected through a wide surface-area contact with low impedance and metalized EMC cable glands. The product can be commissioned only by specialists with extensive knowledge of drive technology. This device has a peak current rating of 5.8 A. The unit has a smooth output shaft. Its shaft seal offers protection against oil mist. Its feedback system and holding brake result in an overall increased length. This motor should not be subject to brute force on the shaft and flange. The product is not intended to feature encapsulated assembly. This device is likely to have a mechanically constrained shaft mounting when a rigid coupling with additional external bearings is used. The unit uses a comcoder with 2048 PPR for feedback. It has no in-built holding brake. This servomotor portrays vibration class N as per DIN EN 60034-14 specifications. This motor houses a flange that is mounted according to IEC standards. The product cannot be mounted horizontally but supports horizontal and vertical mounting.