Product Description

The AKM33H-ANC21-00 synchronous servomotor from Kollmorgen is a DC motor with a three-phase winding in its stator. The motor is one of the various such motors in the AKM product group. This product has a matt black enamel finish on its housing. The device related handling activities are intended to be undertaken by only properly qualified personnel. This unit assembly plus setup should be done after reading its associated documentation. Its wiring diagram is available for reference in the Installation and Setup Instructions manual for the associated SERVOSTAR servo amplifier. The motor nameplate is attached to the housing using an adhesive. This product installation is meant to be done only on a site that is free of any kind of aggressive material. The device has a spring-applied standstill holding brake that is not suitable for repeated braking actions. This unit must be assessed for signs of visible damage or defects before mounting if its packaging is damaged. It supports a maximum stacking height of 10. The motor should be inspected after every 2500 hours of operation for noises from its bearings. This product uses a comcoder with 1024 PPR for feedback. The device depicts a continuous stalled torque of 2.88 Nm at a winding temperature rise of 100 ?C. This unit portrays very low cogging. It is important to follow the BGV A3 regulations when handling the motor. The servomotor is intended to be run independently only after removing the fitted key. This product along with the servo amplifier forms a closed speed or torque control loop in drive systems. The device has no harmful elements in its components that tend to impact the environment adversely.