Product Description

The AKM33H-ACMNR-00 Kollmorgen synchronous servomotor must encompass an electrical connection over a large surface area between it and the mounting plate in the switch cabinet for the grounding connection. This product should have a DC bus link voltage of less than 40 V for it to be used. The device related cabling process involves connecting the resolver, the shields to the shielding terminals and shielding at both ends. This unit may encounter EMC interference if its shielding is installed incorrectly. Its cables have a lifespan of one million bending cycles. The motor shaft end should be free of shocks when it is transported. This product can be opened for cleaning only by the manufacturer. The device is free of any hazardous substances that have a harmful impact on the environment. This unit has an adhesive nameplate on its housing. It comes equipped with a keyway shaft. The servomotor is designed to support operation at a temperature that ranges from 5 °C to 40 °C at a site altitude of up to 1000 m above sea level. This product has a flange accuracy in accordance with DIN 42955 specifications. The device uses a short or half key to balance its shaft. This unit portrays a peak torque rating of 10.2 Nm. It uses a round angular connector with 12 poles for the resolver connection. The motor has a H type winding and a rotor length of 3. This product has no customization. The device features an easy commissioning process. This unit has a maximum bus DC voltage rating of 640 VDC. It can be directly mated to the manufacturer's servo drive. The product is meant to be handled only after reading and understanding the manual and observing the safety details mentioned in it. This device can be allowed to run without coupled load only after its fitted key is removed from the shaft.