Product Description

The AKM33H-ACCNR-01 synchronous servomotor manufactured by Kollmorgen is driven by a SERVOSTAR digital servo amplifier from the same manufacturer. This product has a 70 mm flange that is designed according to IEC standard. The device has a cylindrical shaft end. The unit is equipped with a keyway shaft. It encounters axial as well as radial forces when it is under operation. This motor realizes its power transmission with a locking thread through its cylindrical shaft end. The product is equipped with a shaft seal that safeguards the shaft bushing against oil spray and oil mist. This device may portray lower than rated data because of the shaft seal. The unit can be incorporated only in electrical machinery for which a risk assessment has been done to make sure that unforeseen movements do not trigger dangerous consequences. Its shaft bushing has an IP 67 degree of protection. This servomotor is likely to cause damage to property or harm to personnel because of improper handling. The product must comply with the specifications of connection conditions. This device handling can be done only by people who are aware of the national accident prevention regulations. The motor surface temperature should be checked to see that it is below 40 °C after operation before it can be touched. This product offers no assurance of personnel protection without a low-resistance earthing connection. The device houses a thermal resistor in its windings that needs regular observation and evaluation. This unit features a rated power of 1.31 kW at 230 V. It should be free of axial forces on the shaft as far as possible to avoid motor damage. The motor wiring is to be done according to the wiring diagram presented in the manual of the servo amplifier.