AKM33E-CCC2AB00

Product Description

The AKM33E-CCC2AB00 is a synchronous servomotor produced by Kollmorgen. It should be used with a digital servo amplifier from SERVOSTAR. Only trained and qualified personnel must perform the setup and assembly of the servomotor after carefully reading and understanding the product manual. The finish of the unit is matt black. The standard weight of the device is 2.9 kg. The motor has a maximum bus voltage rating of 640 VDC. Its flange size is 70 mm and the rotor length is 3. The product comes with E type winding and is equipped with a keyway shaft. The AKM servomotor incorporates rotatable angular connectors to facilitate power supply and feedback signals. The product has a standstill torque of 2.79 Nm and a standstill current of 2.58 A with a tolerance of +/- 10%. The rotor moment of inertia of the unit is 0.85 J. The peak current of the motor is 10.3 A and its peak torque is 9.96 Nm. There are 8 poles in the servomotor. The static friction torque of the device is 0.026 Nm. The unit comes with a thermal time constant of 20 minutes. The AKM servomotor is equipped with an in-built 24V holding brake. The holding torque of the motor at 120?C is 2.5 Nm. Caution should be exercised when operating the servomotor and disconnecting it from the power connections because the power connections could be live even when the motor is not rotating. Therefore, when the motor is live, the power connections must never be disconnected. Doing so can lead to flashovers resulting in damage to the contacts and injuries to persons. It should be noted that the device should not be opened by the user under any circumstances. Opening the servomotor invalidates the warranty.