Product Description

The Kollmorgen AKM33E-ANCNLB00 is a synchronous servomotor that serves as a precision equipment. The product is not recommended for encapsulated assembly. The motor features a standstill current rating of 2.58 A. The assembly and mounting of the servomotor should be done only in a site that is free of aggressive and conductive material. The product must incorporate correct EMC shielding and earthing as per the instructions provided for the associated servo amplifier. The AKM servomotor does not have an in-built holding brake. The device is characterized by a standard customization option. The casing and mounting plate of the motor must be earthed properly. Only the manufacturer's preassembled shielded lines should be used for the power connections of the servomotor. The capacitors of the unit take at least five minutes to get fully discharged after the power supply has been turned off. So, the user should avoid touching the motor immediately after it is turned off. The rated speed of the servomotor at 480 V is 5000 per minute. Its peak current is 10.3 A and peak torque is 9.96 Nm. The standard weight of the device is 2.9 kg. There are a total of 8 poles in the motor. The housing of the AKM servomotor should be safely earthed to the PE busbar in the switch cabinet. Without a low-resistance earth connection, it is impossible to ensure electrical safety. The unit should be checked for bearing noise once every 2500 operating hours. If there is any noise during operation, the operation of the motor must be stopped, and the bearing should be replaced. Opening the servomotor for any purpose invalidates the warranty. If the housing of the motor is dirty, it can be cleaned using isopropanol or something similar.