Product Description

The AKM32F-BNBN2-00 Kollmorgen synchronous servomotor features a F type winding. The servomotor has no customization. The product uses a comcoder with 2048 PPR that increases the overall length for feedback. This device is delivered without a holding brake. The unit may cause minor burns when its hot surface is touched without using appropriate safety apparel. It can have dangerously high electrical voltages at the connecting points during and soon after operation. This motor cannot be connected directly to a mains supply network. The product comprises a keyway shaft. This device should not be lifted by holding on to the shaft. The unit is not equipped with any integrated fan. It features a storage temperature of -25 ?C to 55 ?C with a maximum variation of 20K/hour. This motor can be stored for an indefinite time duration. The product nameplate must be visible all the time. This device has IP 65 protection rating. The unit features low harmonic distortion. Its flange is mounted according to NEMA standards. This servomotor portrays Class F insulation according to IEC 85 specification. The product offers no support for a retrofit action. This device has no radial shaft seal around the shaft. Its key is inserted in compliance with DIN 6885 specifications. The motor must have a DC link voltage of below 40 V when its components are touched. This product should have an electrical connection with a large surface area between the points indicated and the mounting plate to suppress high-frequency interference. The device must be wired only according to the wiring diagram given in the manual for the related servo amplifier. This unit should be connected with the manufacturer's preassembled cables. It cannot be mounted diagonally.