Product Description

The AKM32E-ACC2AB00 synchronous servomotor launched by Kollmorgen is intended for drives for equipment with high requirements of dynamics, including industrial robots, machines tools, and textile and packing machinery. The motor must be operated only under the ambient conditions. When it comes to packing, the unit should be packed using a cardboard packing that is equipped with Instapak? foam cushion. The device has a flange size of 70 mm and a rotor length of 2. The maximum bus voltage of the motor is 640 VDC. The product comes with E winding type and a keyway shaft. The AKM servomotor sports an Acuro (Biss) multi-turn feedback unit. The device must be stored, transported, operated, and maintained with caution. Its housing should be safely earthed to the PE busbar in the switch cabinet. A low-resistance earth connection is needed to ensure electrical safety. When the motor is live, the user should never unplug the connectors. If the connectors are unplugged when the motor is under operation, it could lead to severe injury or extensive material damage. The site of installation of the AKM servomotor must be free of conductive and aggressive material. In the case of V3 mounting, care should be exercised so that no water or other liquids enter the bearings. If an encapsulated assembly is required, the applications department of Kollmorgen must be consulted. The servomotor needs unimpeded ventilation. The permissible ambient and flange temperatures must be observed. Only personnel who are trained and qualified in electrical engineering must handle the wiring of the motor. The unit should be de-energized at the time of assembly and wiring. The power supply should be turned on only during startup of the device. The motor must be wired up by referring to the wiring diagrams in the servo amplifier?s Installation and Setup Instructions manual.