Product Description
The AKM32C-ACCN2-00 synchronous servomotor from Kollmorgen has distinct power and control cables that must be routed at a distance of more than 20 cm from each other. This motor is delivered without a holding brake and has a keyway shaft. The product must be provided with the correct EMC shielding and earthing as mentioned in the manual for the servo amplifier. The device is supposed to be handled only after reading and understanding its documentation. This unit related shielding must be connected through a wide surface area contact with low impedance and EMC cable glands or metalized connector housings.
The motor cable has a capacitance of less than 150 pF/m. This product has ball bearings with a grease packing for lubrication. The device is CE Certified and cUL Recognized. This unit shows signs of running away because of an incorrect sequence of its phases. Its standstill current is a sinusoidal current that is drawn by the motor at a speed of less than 100 min-1 to generate the standstill torque. The motor has a thermal resistance of 1.11 ?C/W. This product has no shaft seal for improved environmental protection. The device can be operated at a voltage of up to 480 VAC. This unit is operated in a drive system with a SERVOSTAR servo amplifier.
The servomotor can cause damage to property and/or injury to personnel with improper handling. Its power connectors may be live for a brief period even after the output shaft has stopped rotating following the operation. This product must at no time have a direct connection to the mains supply. The device can be installed only in electrical machinery for industrial use. This unit has a flange code of 3. It has a thermal contact in its windings.
Wake Industrial Warranty
