Product Description

The Kollmorgen AKM31C-GSS2S-03 synchronous servomotor houses permanent magnets and a three-phase winding. This motor has a special shaft and special connectors along with special feedback and customization. This product is powered by a digital SERVOSTAR servo amplifier from the same manufacturer. The device must have a DC link voltage of below 40 V when it is touched after its operation. This unit related shaft and flange are especially vulnerable during assembly and storage. It must be made sure that the permissible radial forces are not exceeded when toothed belts are used. The motor portrays a mechanically constrained mounting when a rigid coupling with additional external bearings is used. This product has a pole count of 10 that must be set correctly in the servo amplifier. The device is meant to be used for positioning tasks in industrial machinery. This unit is delivered with a spring-applied 24 VDC holding brake. It is not possible to retrofit the holding brake. The motor has a climatic category of 3K3 that complies with EN 50178 specifications. This product has a RAL 9005 enamel on its housing. The device has a 10% increase in radial force from the permissible limit when there is a power takeoff from the center of the free end of the shaft. This servomotor has a thermostat that does not offer protection against heavy overloading and shorting. The unit does not come with its mating connectors. It incorporates special feedback. This product does not have any radial shaft seal. The device is not intended to be used for applications that demand an ambient temperature of higher than 40 ?C. This unit requires an electrical connection with a large surface area between some of its components and its mounting plate in the switch cabinet. It is needed to use a motor choke when the motor cable length is more than 25 mm.