Product Description

The AKM24C-ACBN2-00 synchronous servomotor by Kollmorgen is designed exclusively for positioning tasks in industrial applications. This motor is compatible with all standard global voltages. The product has a low-cogging design and a potted profile. This device features plug-and-play recognition. The unit also supports full-frequency autotuning on AKD servo drives. It cannot be used in environments with caustic agents. This motor conforms to the low voltage EC 2014/35/EU directives. The product should be transported with extreme care taking care to avoid shock to the shaft end and the flange. This device has a nameplate with its type code, certifications and technical details. The unit has a rotor length of 4. It is meant to be handled only by properly qualified personnel. This motor tends to get overheated if its permissible voltage or current rating is exceeded. The product should never be operated without a proper grounding connection. This device is to be operated only after reading and understanding its documentation. The unit can be allowed to run without a coupled load only after removing the fitted key from the output shaft. It has an IP 65 degree of protection. This servomotor can be touched only after five minutes of switching off its power supply so that its capacitors get discharged fully. The product has a thermal sensor in its windings that needs to be observed and evaluated periodically. This device is delivered without a built-in holding brake. The unit poses a risk of danger when it is raised with a suspended load. Its maintenance and cleaning must be done by qualified personnel. This motor has a C type winding.