Product Description

The AKM22G-ENM2C-00 is a brushless DC servomotor from the house of Kollmorgen. It is intended for use in industrial environments. Before installing and commissioning the servomotor, it is crucial to read the documentation. The device is enameled in matt black, and it should be noted that the finish is not resistant against solvents like nitro-thinners and trichloroethylene. The unit must be operated only under the ambient conditions specified in the product documentation. The device is meant to be driven by a servo amplifier from the SERVOSTAR series. The flange size of the AKM servomotor is 58 mm and its rotor length is 2. The unit comes with G type winding. The motor has a built-in 24V holding brake. The unit incorporates a 0.5m shielded cable with IP20 connectors. The feedback option provided in the device is a Smart feedback device. The motor should never be directly connected to the mains supply. The thermal contact integrated into the servomotor windings must be observed and evaluated. The standstill torque of the motor is 0.88 Nm and its standstill current is 4.82 A. The maximum mains voltage of the device is 480 VAC. The torque constant of the device is 0.18 Nm/A. The AKM servomotor has ball bearings, which should be replaced after 20,000 hours of operation under rated conditions. The device should be checked for the bearing noise once every 2500 operating hours. In the case of noises, the user must stop the operation of the motor and replace the bearings. Wherever possible, the user must use only backlash-free, frictionally-locking couplings or collets. The coupling must be aligned correctly. A displacement will lead to unacceptable vibration and the coupling and bearings will be damaged or destroyed.