Product Description

The AKM22E-BNM22-01 is a reliable synchronous servomotor from the house of Kollmorgen. The motor has a flange size of 58 mm and a rotor length of 2. The unit features an E winding type. The device is equipped with a 0.5m shielded cable with IP20 connectors. The flange design is customized as per NEMA standard. The product has a smooth shaft with a shaft seal. The motor has a 24V holding brake that serves as a standstill brake. It relies on comcoder with 2048 PPR for feedback. The product has a matt black finish. The AKM servomotor has permanent magnets in its rotor. The rare earth neodymium-iron-boron magnetic material is a crucial factor in making it possible to drive the motor in a dynamic fashion. A three-phase winding driven by the servo amplifier used is integrated into the stator. The device does not have any brushes because commutation is performed electronically by the servo amplifier used. The temperature of the winding is monitored by temperature sensors present in the stator windings and is signaled via an electrically isolated thermistor. The basic mounting style for the AKM servomotor is style IM B5. The motor comes up to insulation material class F according to IEC 85. The three-phase servomotor is designed to operate with a SERVOSTAR servo amplifier. Together, both the units form a closed speed or torque control loop. Extreme caution should be exercised at the time of transport and handling the servomotor. The site should be free of aggressive and conductive material. For IM V3 mounting, care should be taken that no liquids enter the bearings of the motor. If an encapsulated assembly is required, the applications department of Kollmorgen should be consulted beforehand.