Product Description

The AKM22E-ANS2R-02 is a robust and versatile brushless servomotor from the house of Kollmorgen. The device incorporates special connectors and a Resolver feedback system. The motor is equipped with a smooth shaft and its winding type is E. The flange size of the product is 58 mm and its flange is customized to IEC Standard. Care should be taken that the motor does not come in contact with food and beverages. The device has a thermal contact in its windings. The servomotor should not be directly connected to the mains supply. The motor connection must be done using only the cables and accessories supplied by the manufacturer. The AKM servomotor must be transported carefully, making sure that it is not subject to shock. The product should be checked for bearing noise after every 2500 hours of operation under rated conditions. If the user hears any noise from the bearings, they should be replaced immediately. This housing of the product can be cleaned using isopropanol or a similar agent. The maintenance of the device should be done only by qualified personnel. The axial load permitted at the shaft end of the device at 5000 per minute is 60 N. The product comes with a 24V holding brake. The weight of the brake is 0.27 kg. The AKM servomotor comes with a nameplate stuck on its housing using an adhesive. The unit has temperature sensors in its stator windings to monitor their temperature. The product is highly dynamic because of the choice of materials used as its permanent magnets. Its commutation is performed electronically by the servo amplifier. It is important to ensure that the housing of the servomotor is earthed safely to the PE busbar in the switch cabinet. Without a low-resistance earth connection, electrical safety cannot be assured.