Product Description

The AKM22E-ACC2R-00 Kollmorgen synchronous servomotor has an adhesive nameplate on its housing. This product features an E type winding. The device should always be operated with the manufacturer's SERVOSTAR amplifier. This unit assembly plus setup must be done only after reading the associated documentation. Its housing must be safely earthed to the protective earth busbar in the switch cabinet. The motor surface can become very hot when it is under operation. This product features an integrated thermal contact in its windings. The device cannot be immersed in or sprayed with liquid for cleaning. This motor must have no fluid accumulation around the shaft when the installation is done vertically with the shaft facing upwards. The product has an unlimited storage time. This device may have a dirty housing as a result of long operating hours. The unit portrays details such as the DC bus link voltage and rated power on its nameplate. It depicts a torque of 0.87 Nm and a current of 2.73 A in standstill mode. The motor comprises Class F insulation. This product is ideal for applications with high dynamics and stability requirements. The device features a maximum ambient operating temperature of 40 °C. This unit has a tolerance class of N. It will often have a high radial force if the motor is driven through pinions. The servomotor is equipped with three pole pairs. This product related holding brake is designed as a standstill brake. The device has an extended length because of the holding brake. This unit needs to be safeguarded against stress for proper operation. Its bearings tend to get damaged when they are subject to force. The motor has to be in the de-energized state during its assembly.