Product Description

The AKM22C-ENBN2-00 is a high-performing synchronous servomotor launched by Kollmorgen. The product is designed to deliver best-in-class performance. The motor comes with a flange size of 58 mm and a rotor length of 2. The device has a C type winding. The motor is meant to be driven by a SERVOSTAR series digital servo amplifier. The device must be handled only by personnel trained and qualified in mechanical and electrical engineering. The motor is not suitable for use in residential environments. The housing of the servomotor should be properly earthed before it is operated. The AKM servomotor has a standstill torque of 0.84 Nm and a standstill current of 1.39 A. The unit has a thermal contact integration in its windings. This servomotor is equipped with 6 poles. The rotor moment of inertia of the device is 0.16 J and its static friction torque is 0.005 Nm. The thermal time constant of the device is 9 minutes. The radial load permitted at the shaft end of the servomotor at 5000 per minute is 145 N. The standard weight of the device is 01.1 Kg. The AKM servomotor should be protected against brute force on its flange and shaft. The device associated couplings are tightened using a locking thread. The unit encounters radial and axial forces when it is in operation. Its switch cabinet must be switched off during the process of electrical installation. This motor wiring must be done as per the instructions provided for the same in the manual of the servo amplifier used. The user should not open the motor for cleaning or other purposes, because opening the motor voids the warranty.