Product Description

The Kollmorgen AKM22C-ANB2AB00 is a synchronous servomotor that is meant for use in equipment that requires a high level of dynamics and stability. The motor should be operated only under the ambient conditions. The device comes with rotatable angular connectors for power supply and feedback signals. The unit has a 58 mm flange size that is designed in accordance with the IEC standard. The device sports a smooth shaft. The servomotor should not be put to use at a temperature of over 40?C. The standstill torque of the AKM servomotor is 0.84 Nm and its standstill current is 1.39 A. The rated speed of the motor at 400 V is 8000 per minute. The unit has a peak current of 5.6 A and a peak torque of 2.73 Nm. Its static friction torque is 0.005 Nm. The standard weight of the motor is 1.1 kg. The servomotor is equipped with a 24V holding brake. The electrical power of the brake is 8.4 W. If the AKM servomotor is not handled properly, it can cause damage to property or harm to personnel. The product should comply with the specifications of connection conditions. The motor should be handled only by people who are aware of the national accident prevention regulations. The surface temperature of the servomotor must be checked before it can be touched to make sure that it is below 40?C after operation. The product offers no assurance of personnel protection without a low-resistance earthing connection. The unit must be free of axial forces on the shaft as far as possible to avoid motor damage. The motor wiring should be done according to the wiring diagram presented in the manual of the servo amplifier.