Product Description

The AKM21C-CKMN22-00 servomotor launched by Kollmorgen is a reliable equipment that is easy to commission and use with plug-and-play recognition. The servomotor has an open keyway shaft. The unit is designed to be driven by a servo amplifier from Kollmorgen under speed and/or torque control. The motor features a flange size of 58 mm and a rotor length of 1. The device features C winding type. The product should be operated at an ambient temperature of 0?C to 40?C. The unit has temperature sensors in the stator windings for monitoring the temperature of the winding. The AKM servomotor incorporates a comcoder with 2048 PPR as its feedback device. The product has a 0.5m shielded cable with IP20 connectors for power supply and feedback signals. When touching the servomotor, caution must be exercised. The motor surface can exceed a temperature of 100?C. So, before touching the device, it is important to measure the surface temperature and wait until it drops below 40?C. The axial load permitted at the shaft end of the motor is 60 N and the radial load permitted at its shaft end is 145 N at 5000 per minute. Only personnel who are trained and qualified in electrical engineering should handle the wiring of the AKM servomotor. The device should be de-energized at the time of wiring and assembly. The switch cabinet must also remain switched off. The power supply should be turned on only when starting the servomotor. The product should be wired up using the help of the wiring diagrams provided in the Installation and Setup Instructions manual of the servo amplifier used. Opening the servomotor should be avoided because doing so voids the warranty.