Product Description

The AKM21C-ANM2C-00 synchronous servomotor by Kollmorgen is a DC brushless motor. This product is one of the several servomotors in the AKM series from the manufacturer. The device is CE Certified and cUL Recognized. This unit assembly, installation, setup and operation must be done only by properly qualified personnel. It should be used only in machinery for which a hazard analysis is done. The motor is not to be used outside the indicated ambient conditions. This product comprises ball bearings with a grease packing. The device is suitable for deployment in positioning tasks. This unit features an IM B5 basic mounting style. Its axial force must never exceed one-third of the radial force. The motor utilizes a 0.5m shielded cable with IP 20 connectors. This product has a standstill current rating of 1.58 A. The device is integrated with a spring applied holding brake. This unit might require additional wiring if its holding brake is not controlled directly by the servo amplifier. It delivers a closed speed or torque control loop when it is used with the servo amplifier. The servomotor has to be kept free of unacceptable stresses all the time. This product should be checked to see that it is in the de-energized state during its assembly. The device connection is meant to be done with the manufacturer's pre-assembled cables. This unit setup process includes commissioning the related drive as per the setup instructions of the servo amplifier. It is likely to have an unsteady operation if its phases are in the wrong sequence. The motor torque in standstill mode can be indefinitely maintained at rated ambient conditions and a speed of less than 100 mm-1.