AKD-T02407/

Product Description

The AKD-T02407/ Ethernet-based servo drive is often termed as an AKD BASIC drive. This product associated unpacking and basic tests must be done only by people with knowledge of electrical engineering and drive technology. The device commissioning and installation are supposed to be done only after reading its associated documentation. This unit installation is permitted only in a machine for which risk assessment is done and measures have been taken to make sure that unforeseen movements can result in no damage to property or personnel injury. It is necessary to check the drive-motor combination before use as an unsuitable motor can cause drive damage. The drive may restart on its own when the power is turned on based on the parameter that has been set. The product touching and handling must be done by personnel only after they have electrostatically discharged themselves. The device is intended to be placed on a conductive surface all the time. This unit offers no assurance of personnel protection without low-resistance earthing. Its heatsink temperature must be less than 40 °C for it to be touched after operation. The product may have uncovered live sections during operation. This device wiring is meant to be done only with cables having copper conductors. The unit can be used only if the associated machine or plant adheres to the requirements of the regional directives. Its symmetrical rated current should not exceed 200 kA at 240 V, 400 V and 480 V. This servo drive should include an extra isolating transformer when it is connected to a supply network of another voltage. The product has no manufacturer-defined ratings for a DC input voltage.