AKD-T02406-NBAN-0000

Product Description

The AKD-T02406-NBAN-0000 servo drive from Kollmorgen functions like a BASIC version drive. This servo drive supports simple BASIC programmability. The product is CE Certified and RoHS Compliant. This device associated inputs and outputs are connected using its X7 and X8 connectors. The unit has a unique IP address that must be set using the two rotary switches. Its display highlights the d9 code when its firmware starts downloading. This drive relies on the setup wizard of its WorkBench software for its initial setup. The unit will not be capable of communicating with the PC if it is disconnected from the WorkBench software. This servo drive is associated with a peak time of 5 seconds. It has a standard width on the front and back. The product is highlighted by a high power density. This device has an update rate of 1.5 MHz. The unit incorporates analog connectivity. Its Safe Torque Off functionality is as per IEC 62061 SIL 2 specifications. This drive houses an IGBT module at the output stage of its power section. The product features the ability to monitor the temperature of the associated motor. This device depicts full digital control by performing like a digital current controller. The unit must never be operated outside a control cabinet. This drive has a voltage rating between -2 VDC and 2 VDC for its digital inputs in the OFF state. It must have a proper grounding connection before it is put to use. The product uses a terminal connector with six poles for connecting to the motor when the mains voltage supply is between 120 V and 240 V. This device is integrated with an internal regen resistor and also supports the connection of an external resistor if required. The unit has a switch-on threshold limit of 380 V for a 120/240 V supply voltage.