AKD-T00607-NBAN-0000

Product Description

The AKD-T00607-NBAN-0000 Kollmorgen Ethernet servo drive belongs to the AKD product of similar drives from the manufacturer. This product is essentially a Base drive with simple BASIC programmability. The device is often referred to as an AKD BASIC drive. It is characterized by an analog connectivity option and a standard housing. This unit incorporates a TCP/IP service channel. Its power section has a regen circuit with dynamic distribution of the generated power. The drive has one STO input and one Enable input apart from the programmable digital as well as analog inputs plus outputs. This device has no option cards that increase the number of inputs and outputs. The drive uses its very fast digital inputs for position latching and as 24 V inputs for electronic gearing. This unit features a firmware that polls the AKD capture engine once every 62.5 µs. Its programmable inputs are not programmed by default. The product supports source or sink type wiring for the Enable digital input. This device has floating style digital outputs with maximum 100 mA current rating and 20 VDC to 30 VDC voltage rating. The unit has an IP address in 192.168.0.nn format for the static IP address. It features a current rating of 10 A at 240 V for the fuse of its external regen resistor. This servo drive has one push-button that can be used to highlight its IP address on the two-character display. Its service interface can be used to establish a direct connection with an industrial PC when the power supply is switched off. The product portrays a voltage rise speed of 7.2 kV/µs. This device features a tightening torque of 1.7 Nm for the connector associated with the PE block. The unit renders encoder emulation through its 9-pin male SubD connector with 1 A current rating and less than 100 V voltage rating.