Product Description

The AKD-T00607-ICAN-0000 Ethernet servo drive produced by Kollmorgen features an auxiliary voltage supply of 24 V with a tolerance of +/-10%. This product comes with a switching frequency of 8 kHz for the output stage. The device has a tightening torque between 0.2 Nm and 0.25 Nm for its X1 connector. This unit incorporates an I/O option card for extension. It has four extra connectors for the connection of its I/O signals. The product comprises a few programmable digital inputs. This device encompasses analog inputs on its X8 and X24 connectors. The unit has a non-linearity of less than 0.1% of full scale for the analog inputs. The drive has a very hot heatsink during and immediately after the operation phase. It must be kept away from electrostatically charged tools and components. This product can use its analog setpoint input as a reduced sensitivity input for setting up a jog operation. The device has two analog outputs with the I/O option card. This unit has a list of pre-programmed functions that is listed in the associated WorkBench setup software. Its digital inputs can be used with sink type or source type voltages. The drive has a floating reference line for its digital inputs. This product features less than 15 mA current rating for its programmable digital inputs. The unit tends to have a leakage current through its protective earth conductor. Its PE terminal and PE connection screws must be used to fulfill the PE connection requirements. The servo drive is a three-phase system with a B6 bridge. This product must be equipped with residual current protective devices that are sensitive to all currents to minimize DC currents. The device causes electric shock if it is not EMC grounded properly.