Product Description

The AKD-T00607/ Ethernet servo drive produced by Kollmorgen has an internal regen resistor with 33 Ohms rating. This product can cause electromagnetic interference when it is operated in residential areas. The device must not have a periodic overvoltage of more than 1,000 V between its housing and three phases. This unit can be used for group installations only after appropriate evaluations have been carried out for wire voltage rating, fuse protection, system dielectric requirements, branch circuit protection and other factors. It has a possibility of getting damaged because of the incorrect polarity of DC power. This drive does not require any external EMC filtering measures to be undertaken by the user. The product should not have over 200 kA symmetrical current at 240 V, 400 V and 480 V. This device incorporates copper conductors with cross-sections as per IEC 60204 specifications for wiring. The unit is fitted with a warning note asking the user to wait for five minutes after removing the power supply. It has a control logic voltage of 24 V. This servo drive has an update rate of 1.5 MHz. The product should not be opened by the user for cleaning its interior. This device operation is not permitted in a machine that fails to comply with the appropriate national standards or directives. The unit features a protective grill on its fan. Its protective earth wiring must be done only with green colored wires that have one or more yellow stripes. This drive has a high voltage of up to 900 V during its operation. The product may get damaged because of an unsuitable motor, wrong mains voltage or wrong wiring.