Product Description

The AKD-P04807-NCCN-0000 is a state-of-the-art drive controller manufactured by Kollmorgen according to American and European quality standards. This controller is intended to carry out the accurate closed loop control of the speed, position, torque and generation operation of synchronous motors especially the AKM kollmorgen motor series. The controller is a modular device that is intended to be built into electrical plants and can only be operated as integral components of these plants. The housing of this controller provides protection according to the IP20 protection class, however it is still important to ensure that the controller is installed into a closed control cabinet that can preserve the ambient temperature around the controller within 0 to about 40 degree Celsius. Additional ventilation or cooling may be required to regulate the temperature in the control cabinet. The AKD-P04807-NCCN-0000 industrial servo drive controller is intended to be used with a three-phase supply network that can generate a rated supply voltage that falls between 240 to about 480 volts. Also, the rated supply frequency should be between 50 to 400 Hertz. The AKD-P04807-NCCN-0000 industrial drive controller requires a rated input current of 49.3 amperes, it also requires an input power of 40.9 kilovolts per ampere for S1 operation. Under ideal operating conditions, this controller generates a continuous output current of 48 amperes, however it can also generate an output current as high as 96 amperes. The AKD-P04807-NCCN-0000 industrial controller is about 385 millimeters tall with a standard width of 185 millimeters. Also, the total weight of the controller is about 11.5 kilograms. When the AKD-P04807-NCCN-0000 is delivered with also supplied with a printed copy of the ADK safety guide, a DVD containing installation manual, and an appropriate matting connectors, and the grounding plate.