Product Description

The AKD-P04807-NBEI-0000 servo drive delivered by Kollmorgen provided by Kollmorgen meets the Category C3 requirements when a motor cable of 10 meters length or longer is used. This product is meant to be incorporated in an electrical machine or plant intended for industrial use. The device has no hazardous substances such as PBT substances and CMR substances. The unit features an Ethernet/IP connectivity option. Its MAC address can be found in its nameplate attached on the side. This drive is connected to an Ethernet/IP network using its RJ-45 X11 connector comprising two inbuilt LEDs. The product has a good Ethernet/IP connection if the link LEDs on its X11 connector and the Master are both illuminated in green color. This device associated built-in protection measures must never be removed. The unit has no SD card slot. Its setup software WorkBench is compatible with only Windows operating system. This drive should be unpacked taking care to follow the safety instructions in its documentation. The product reports a F134 fault code on the LED display when its secondary feedback is in an illegal state. This device has a communications fault when a wrong PC interface is selected. The unit reports a motor oscillating error if its feedback cable has a broken shielding. It is in Enabled state only when its Hardware Enable signal is supplied with a 24 V supply and the SW Enable setting is done in WorkBench. The servo drive has a standard width housing. This product has a DC bus capacitance rating of 900 µF. This unit has no regen resistor. It also features 9 A maximum inrush current rating at 20 °C and 480 V.