AKD-P04807-NBCC-E000

Product Description

The AKD-P04807-NBCC-E000 Kollmorgen Ethernet-based digital servo drive portrays position indexing capabilities. This product has a standard width housing. The device and/or its related components tend to be directly affected by strong magnetic fields. This unit should be installed in a site that is free of corrosive or conductive materials. It should be taken care to ensure that there is no condensation water dripping on the drive if its control cabinet makes use of cooling systems. The drive should not be mounted in horizontal orientation. This product related mounting plate must be grounded for EMC compliant grounding and shielding. The device must be positioned inside the control cabinet such that there is a clearance distance of more than 150 mm above and below it. This unit tends to have live power and control connections for a short time after switching off the power supply. It supports both EtherCAT and CANopen connectivity options. The servo drive should encompass a doubled protective earth connection as per IEC 61800-5-1 specifications. This product related operating status has to be monitored by its PLC for acknowledging critical situations. The device associated cables can be replaced with only standard cables that meet the specifications listed in the manual. This drive needs a node address setting if its CANopen fieldbus interface is used. The unit repair and service must be done without removing its grounding or equipotential bonding. Its power and control cables have to be routed separately to cut down the interference when its operation takes place. This product must incorporate a differential input as its analog input. The device must incorporate a grounding for shielding with large areas. The unit poses risk of electrical shock with improper grounding.