Product Description

The AKD-P02407-NBEI-I000 Ethernet-based Kollmorgen drive can be embedded with the manufacturer’s Kollmorgen Automation Suite. This product is not to be operated without implementing the associated grounding. The device is equipped with the capability to support encoder emulation. This unit comprises a X11 serial interface connector that can be connected to the Ethernet interface of a PC. It has two rotary switches, a push-button and an LED display that assist in supporting its operation. The product meets the EU Italian Standards requirements. This device will turn itself off automatically as a self-protection measure if it shows signs of overheating. The drive installation must be done only in a place that is not surrounded by conductive materials. This unit must have unimpeded ventilation when it is in use. Its wiring must be done only as per the connection diagram. The product will get damaged if it is associated with a wrong mains voltage. This device portrays a leakage current of higher than 3.5 mA. The unit has potentially live sections and connectors immediately after operation even when the power supply is off. Its installation is to be done by professional staff with qualifications in electrical engineering. This servo drive can be mounted only in the vertical orientation at any point in time. The product is connected to the related motor using shielded cables. This device is capable of implementing encoder emulation with its X9 connector. The unit portrays its IP address on the LED display when the B1 pushbutton is pressed. Its ground leads are meant to be of the same gauge or a gauge lesser than that of the leads to the main power to reduce the electrical noise in the application using the servo drive.