Product Description

The AKD-P02407-NBEI-0000 Kollmorgen servo drive finds is place among the manufacturer’s AKD product group of servo drives. This product is capable of rendering fast operation because of its Ethernet support. The device is customized to meet the requirements of USA standards. This unit is a three-phase system with a B6 bridge. It is necessary to use a residual current protective device that is sensitive to all currents so that any DC fault current gets deflected. The product can also be put to use through an isolating transformer when there is an absolute need for protection against indirect contact although the leakage current is very high. This device poses a risk of electric shock because of a high EMC voltage level if it is not properly grounded. The unit needs to be protected against impermissible stresses all the time. The servo drive has a standard width housing and has no extension scope. This product installation is done using M4 hexagon socket-cap screws, a 3 mm T-handle Allen key, a #2 Phillips head screwdriver and a small slotted screwdriver. The device installation should be done in a site free of conductive or corrosive materials. This unit must be grounded using EMC compliant shielding and grounding. The drive associated protective earth wiring must be done using green colored wires with one or more yellow colored stripes. Its DC bus link voltage must be less than 50 V before it is handled after operation. This product tends to get damaged because of excessively high fusing. The device must be used with only cables that adhere to IEC 60204 specifications. This unit installation and wiring can be done only after making sure that it is not in the live state. It should be provided with an electrically conductive connection featuring the largest possible surface area between the drive and the mounting plate present in the control cabinet.