Product Description

The AKD-P02406-NBEI-0000 servo drive provided by Kollmorgen can be utilized to add time delays. This product comes with encoder emulation and a TCP/IP service channel onboard. The device has a standard width housing. This unit related motion tasks can be manipulated using the Motion Tasks table in the WorkBench software. Its service motion command helps to set up a simple motion for the drive by setting the command source to Mode 0. The drive uses an LED to portray the status of its different possible motion states. This product configuration can be saved in multiple ways using the WorkBench software. The device must never be placed on a non-conductive metallic surface. This unit saves all the changes that the user makes while working on it in its volatile memory. It is possible to opt for saving the changes in the non-volatile memory. The drive can be issued commands quickly and easily using the terminal mode. This product will highlight a warning on its display when it is associated with a parameter file from a different model. The device has a closed output stage and an open fault relay contact when a fault takes place during operation. This servo drive displays the letter F or the letter n on the left side of the code to denote a fault or a warning. The unit may encounter multiple faults because of a single fault condition. It portrays all the fault codes one after the other on the LED display in order of priority. This product has a F101 code on the display when the installed firmware is incompatible with the drive. The device has an Ethernet/IP connectivity option.