Product Description

Kollmorgen is known worldwide for its wide range of industrial products and clients across the globe. The AKD-P02406-NBEC-0000 servo drive is one of the several AKD series of Ethernet servo drives from the manufacturer. This drive depicts a brushless design and encompasses a standard housing. The product is equipped with the capability of commanding multiple motions, making decisions, adding time delays and more. The unit has a supply voltage ranging between 120 V and 240 V with a tolerance of +/-10%. Its parameters are intended to be set using the WorkBench setup software. The product has a common mode rejection ratio of more than 30 dB at 60 Hz for its analog inputs. This device must be properly grounded to a flat grounding plate before it is put to operation. The unit encompasses a LED display on its front panel to display the fault and warning codes. It supports parallel connection of the DC bus link at the X3 and X14 connectors for equal distribution of the regen power among all the drives connected to the same DC bus circuit. The product installation should be done on a site that is free of corrosive or conductive materials. This device features a rated output current of 24 A with +/-3% RMS value. The unit is intended to be assembled next to its power supply module. It must be installed inside a control cabinet only in vertical orientation. This servo drive controls the holding brake of the associated motor in a drive system. The product installation and service must be done only when the power supply is turned off.