Product Description

The AKD-P02406-NAEC-0000 Kollmorgen servo drive works along with the manufacturer's servomotor in a drive control system. This drive has an overvoltage limit of 420 V. The product features protection against over-voltage and over-current for added dependability. This device is noted for its versatility and compact design. The unit has a high power density. It also encompasses optically isolated inputs/outputs with screw terminal connectors. It can be used in single as well as multiple axis systems with high performance. This drive is customized according to USA standard. The product has a current loop bandwidth of 2 kHz to 4 kHz. This device is designed for operation at a temperature ranging from 0 ?C to 40 ?C under rated conditions. The unit features relay outputs with a current rating of 1 A and a maximum voltage rating of 30 VDC or 42 VAC. It also comprises an isolated 400 VDC contact/coil. This drive cannot be operated without a secure protective earth connection. The product uses fuses that are UL Listed and CSA Certified. Its advanced dynamic braking mode operates fully in hardware. This device supports the connection of an external regen resistor based on the application requirements. The unit can be coupled with other drives through its DC bus link. It has a special timing for switching on and off the output stage if it has an enabled holding brake function. This servo drive highlights a F234 fault code on the display and shuts down when the temperature inside the control cabinet is very high. The product has Class 3M1 vibrations during operation as per IEC 60721-3-3 specifications. This device portrays an ambient installation elevation of 1000 m above sea level.