Product Description

The AKD-P01207-NBCC-I000 Ethernet-based servo drive from Kollmorgen renders the operations of a position indexer. This product assembly, setup, maintenance and transport must be done only by qualified personnel. The device should be used only in electrical machinery intended for industrial applications. This unit operation is allowed only after ensuring that its unforeseen movements do not cause personnel injury or damage to property. It is intended to be placed only on a conductive surface. The drive must have a DC bus link voltage of less than 50 V when its components are being handled. The product displays various codes on its LED display during operation indicating its operation status. This device provides plug-and-play compatibility with the manufacturer’s motors. The unit has a compact design that allows it to be used in confined spaces. It must be installed in a closed control cabinet. This drive can be used with a wide range of feedback devices. The product uses EtherCAT and CANption bus choices for system optimization. This device has a certified STO safety implementation. The unit can be supplied with power from only three-phase industrial supply networks. This servo drive has not been evaluated by the manufacturer for group installations. Its periodic overvoltage rating between its housing and phases must not exceed 1,000 V. The product cannot support both EtherCAT and CANopen bus choices at a time. This device features color coded terminals for its controllers for identification. The unit supports a maximum surrounding air temperature of 40 °C for its operation. It meets Category C2 requirements for noise immunity when the length of the motor cable is less than 10 meters.