AKD-P01207-NBCC-D065

Product Description

The Kollmorgen AKD-P01207-NBCC-D065 servo drive offers assurance of high performance. This servo drive can be embedded with the manufacturer’s automation suite for single- and multi-axis systems. The product incorporates advanced auto-tuning mechanism. This device is easy to use and has no extension option. The unit is designed to be operated only in three-phase systems with the voltage between 187 V and 528 V. It has IP 20 degree of protection and requires an enclosure for its safe operation. This drive helps to control the holding brake of the connected motor. The product deploys a single channel STO function. This device has a digital display located on the front panel to assist in its troubleshooting. The unit needs to be connected to the protective earth using low-capacity cables to minimize the leakage currents. It can be operated with an isolating transformer when protection against indirect contact is required although there is a high leakage current. This drive has to be protected against impermissible stresses all the time. The product installation must be done by taking care to ensure sufficient ventilation. This device should have its electrical connections intact when it is in the live state. The unit may get damaged if excessively high external fusing is used. Its FAULT contact must be connected in series to the emergency off circuit. This drive is connected to the motor using shielded cables. The product related connections must be done using only cables supplied by the manufacturer. The device allows direct connection of cable shielding by using grounding plates. This unit deploys a parallel connection for the DC bus link voltage. It should be ensured that the distance between the servo drive and an external capacitance module is not more than 500 meters.