Product Description

The AKD-P01207-NACN-0058 Ethernet servo drive offered by Kollmorgen functions like a position indexer with a standard housing. This product has a CANopen connectivity option. The device has the ability to make decisions and process I/Os. This device is connected with an encoder emulator at the X9 connector with 1 A current rating and less than 100 V voltage rating using a 9-pin SubD male connector and a connecting cable with maximum 21 AWG cross-section. The unit controls and monitors the holding brake of the motor. Its motor cable length must not be more than 25 meters in the absence of a motor choke. This product uses the dynamic braking mode based on the DRV.DISMODE parameter setting. The device along with other drives from the same series can be used from a shared DC bus link with an inbuilt regen circuit without any additional measures. This unit has a DC bus capacitance of 470 µF. It has a position loop bandwidth ranging between 1 Hz and 250 Hz. It is capable of detecting over-voltage, over-temperature and over-current. The drive has a high power density. This product is meant to be handled only by skilled personnel with the required expertise. The device is meant to be mounted only in the vertical orientation. The unit exhibits a power derating of 1.5% for every 100 m when it is operated at an altitude of more than 1,000 m and up to 2,500 m above mean sea level. This servo drive is to be installed in a closed control cabinet with IP 54 or higher protection rating. The product portrays Class 3M1 vibrations in accordance with IEC 60721-3-3 specifications during the operations phase.