AKD-P01206-NBPN-0000

Product Description

The AKD-P01206-NBPN-0000 is a robust and versatile servo drive manufactured by Kollmorgen. With advanced autotuning, the servo drive is easy to use. WorkBench is the software used to set up the drive and the software features an intuitive graphical interface that facilitates easy setup, programming, and troubleshooting. The unit should be installed only in an industrial plant that follows all the regional directives-related protocols. The drive contains electrostatically sensitive components. Care should be taken when transporting the device. The drive must be free of shocks during transportation. The unit’s continuous output power is 4000 Watts and its voltage rating is 120/240 VAC. The drive can be connected to one-phase and three-phase industrial supply networks. The servo drive’s PE block supports a tightening torque of up to 1.7 Nm. The product can control the holding brake of the motor that is connected to it. The device can detect over-current, over-voltage, and over-temperature. Unimpeded ventilation should be maintained when operating the drive and an operating temperature range of 0 °C to 40 °C should be maintained. The drive’s power section comes with a DC bus link voltage of 170 VDC to 340 VDC. The servo drive has both internal and external regen resistors. The unit has a resistance of 15 Ohms for both types of resistors. The electrical connections of the servo drive should not disconnected when it is live or under operation. Devices that produce magnetic fields must not be mounted next to the drive. When the unit is operated in non-industrial environments, it can cause high-frequency interference. The drive’s STO safety implementation is certified. When a suspended block isn’t blocked properly, it could result in serious injury. When the STO is active, the device cannot hold a vertical load.