Product Description

The AKD-P01206-NACC-0000 Ethernet servo drive is a compact and versatile drive with a standard housing. The drive comes with two connectivity options of EtherCAT and CANopen. The drive can be connected using one-phase and three-phase industrial supply networks. The unit should be used in industrial environments. It should not be used in environments such as potentially explosive areas and environments exposed to oils, vapors, alkaline solutions, and acids that are corrosive and conductive in nature. The drive doesn’t contain any hazardous substances. The servo drive has a DC bus capacitance of 2460 microfarads. It comes with a peak regen power of 11.7 kW with the internal resistor for 0.5 seconds. For both its internal and external regen resistors, the unit has a resistance of 15 Ohms. The control logic of the device is 24 volts. The power section of the drive has a DC bus link voltage ranging from 170 VDC to 340 VDC. The rated supply voltage of the unit is 120/240 V. Its current rating is 12 Arms and the continuous output power is 4000 Watts. Care should be taken when installing the servo drive. The device should be assembled near its power supply module. Moreover, it should be installed only in vertical orientation inside a control cabinet. The product should be installed and serviced only after turning off the power supply. The electrical connections of the drive should not be undone when it is under operation or live. Devices that generate magnetic fields must not be mounted near the drive. The inside of the device should not be cleaned by the user. This cleaning should be done only by the manufacturer. Liquid should not enter the device. Only professionals from the manufacturer should install, repair, and maintain the servo drive.