AKD-P00607-NCEC-0091

Product Description

The AKD-P00607-NCEC-0091 is a fast Ethernet-based servo drive manufactured by Kollmorgen. This product has a constant 24 V supply. This device triggers the F802 fault code if the STO input has no current when the HW enable signal is active. The product has 100 W continuous power rating for its internal regen resistor at all three possible supply voltages. This device features a switch-on threshold limit of 760 V at 400 V / 480 V. The unit must incorporate a parallel connection for its DC bus link voltage. It must not be used in environments where there are corrosive agents. This drive is disabled by using a controlled stop command when the DRV.DISMODE parameter is set to 2 if there is a drop in velocity below the threshold limit or there is a timeout when the brake is applied. The product must mandatorily be used only as directed by the manufacturer for the specified applications. This device repair is possible only after its decommissioning is executed and it has been dismounted from the machine. The servo drive installation is meant to be undertaken by only trained personnel in compliance with the safety regulations at work and with the specified safety equipment. This product must be kept away from highly insulating materials. The device operation is permitted only after making sure that it has no signs of visible damage. This unit has no negative impact on the environment in which it is operated. It has a compact profile and a high level of flexibility and robustness. This device allows its IP address to be reset with the rotary switches and push-button if the existing IP address hinders with the drive communication.