Product Description

The AKD-P00607-NBCN-D000 is an industrial drive controller designed Kollmorgen to carry out the closed loop control of the speed, output torque and position of synchronous motors used in production and processing systems. This controller is a state-of-the-art device that is intended to be used with the AKM motor series, it is a user-friendly device that can be easily controlled and integrated into the industrial servo system. The housing of this industrial controller provides protection according to the IP20 protection class, however it is still important to install the controller into a closed control cabinet that can maintain the ambient temperature around the controller between 0 to 40 degrees Celsius. The controller is also intended to be built into electrical plants or machines and can only be operated as integral parts of such machines. The AKD-P00607-NBCN-D000 controller is designed to be used with a three-phase industrial supply networks, connection to other types of supply network is possible, however this will require an additional isolating transformer. The group installation of this controller has not be evaluated by Kollmorgen, operators that intend to install the controller in a group are expected to review the group installation for branch circuit protection, wire voltage rating, fuse protection, system dielectric requirements, overvoltage, and input current rating. The user is also responsible to keep the conducted emissions and immunity of the drive within the required noise levels. The AKD-P00607-NBCN-D000 industrial controller operates with a rated input current of 5.4 amperes, it also requires a rated input power of about 4.49 kilovolts ampere for S1 operation. The rated supply voltage required by this controller falls between 240 to 480 volts and must be supplied at a frequency that falls within the range of 50 to 400Hertz.