Product Description

The AKD-P00607-NBCC-0000 servo drive from Kollmorgen has no extension option. The product is customized to meet USA standards. This device supports both EtherCAT and CANopen bus interfaces as its connectivity option. The unit must be put to use only on three-phase industrial supply networks. It can be used for high-performance single- and multi-axis systems by embedding it with the Kollmorgen Automation Suite. This drive depicts an advanced autotuning process that makes it easy to use. The product has a continuous output power rating of 4000 W. This device weighs 2.9 kg. The unit has a very fast digital current loop. This servo drive cannot use both the EtherCAT and CANopen interfaces at a time. Its controls depend on the position of the connected motor when the Position Mode control loop is selected. The product related port number can be changed if needed and appended to its IP address at the end. This device has a direct DC input that is meant to be run into the AC input connection. The unit has an overvoltage limit of 840 V at 400 V / 480 V. This drive must be installed only in a closed control cabinet that has a conductive panel. Its WorkBench software can be installed only on a PC with at least a Pentium II or similar processor, a DVD drive and at least 20 MB of free space. The product supports the resetting of its IP address if needed. This device mounting is allowed only in vertical orientation. The unit related assembly, installation, operation and maintenance must be done only by qualified personnel. Its control cabinet should not be kept open during operation.