AKD-P00307-NCPN-D000

Product Description

The AKD-P00307-NCPN-D000 Ethernet servo drive is a robust, reliable and high-performing servo drive manufactured by Kollmorgen. The drive uses the WorkBench GUI for easy installation and programming. It has a unique MAC address and a distinct IP address. The device, through the WorkBench software, supports three ways to set the IP address. Moreover, the unit comes with plug-and-play support to enable connection of digital feedback devices. The AKD servo drive comes with advanced autotuning functionality that makes it easy to use. Its PROFINET RT connectivity option assists in system optimization. Disassembling of the device should be done only after ensuring that the temperature of the heat sink is less than 40°C. The interiors of the device should be cleaned only by the manufacturer. The unit features EMC filters to fulfill noise immunity requirements. The control logic of the unit is 24 V and the peak time is 5 seconds. The AKD servo drive is compliant with EC 2006/42/EC machinery directives/standards and EC 2014/35/EC low voltage directives/standards. When operated, the device has a relative humidity of 5% to 85%. If the holding brake function of the drive is enabled, the unit has a special timing for turning the output stage on and off. The drive must be mounted vertically inside the closed control cabinet. There should be adequate spacing above and below the unit for ventilation.