Product Description

The AKD-P00307-NCEC-0000 AC servo drive from the house of Kollmorgen comes with a WorkBench GUI to enable easy installation and programming. The unit features the highest bandwidth torque- and velocity- loops and the fastest digital current loop available on the market. The servo drive is capable of fast data acquisition. It is SIL-qualified and features over-voltage, temperature, and current detection for added dependability. The unit’s continuous output power is 2000 Watts and its peak time is 5 seconds. Its maximum regen duty cycle is 15 % and DC bus capacitance is 235 microfarads. The servo drive must be operated in a closed control cabinet that is appropriate for ambient conditions. Only copper conductors should be used for wiring purposes. The unit must be connected to 3-phase industrial supply networks. The device comes with an internal regen resistor. It can also be connected to an external resistor, if required. The servo drive comes with a certified STO (Safe Torque Off) safety implementation. When the system is in motion, the STO function offers a functional safe stop. The unit has a stop function that is defined by IEC 60204. It is used to shut down the device in normal operation. As far as cleaning the drive is concerned, only the manufacturer can clean the inside of the unit. At any cost, spraying or immersing the device should not be done. Extreme caution must be exercised so that water or other liquids do not enter the device.